HP Printer Error Code 60.03 is a common error that indicates a problem with the Tray 2 lift motor of the printer. This error can be caused by a variety of issues, including paper jams, damaged lift motor, or faulty DC controller board.
To fix this error, you can start by turning off the printer and checking tray 2 for any paper jams or obstructions. You should also inspect the lift motor and its connections to the DC controller board to make sure they are secure and functioning properly.
Read: How To Connect HP Printer To Phone Easy Way?
If these steps don’t resolve the issue, you may need to replace the lift motor or DC controller board. It’s recommended to contact a professional if you’re not comfortable with performing these repairs yourself.
To prevent this error from occurring in the future, make sure to regularly clean and maintain your printer, use high-quality paper, and avoid overloading the paper trays. This will help to minimize the risk of paper jams and other issues that can cause the Tray 2 lift motor to malfunction.
What is HP Printer Error Code 60.03?
HP Printer Error Code 60.03 is a common error message that can occur on some HP printers. This error code generally indicates an issue with the Tray 2 lift motor. The Tray 2 lift motor is responsible for lifting the paper tray to allow the printer to access the paper inside.
There are several reasons why this error code might appear, including a malfunctioning lift motor, a damaged or disconnected cable, or a problem with the DC controller board. If the lift motor is unable to lift the tray properly, the printer will display the 60.03 error code and may stop functioning until the issue is resolved.
To fix this error code, you can try a few different troubleshooting steps, such as checking for paper jams or obstructions in the paper tray, ensuring that the lift motor and cable are properly connected, or replacing the lift motor or DC controller board if necessary.
Causes of HP Printer Error Code 60.03?
HP Printer Error Code 60.03 is usually caused by a problem with the Tray 2 lift motor. Here are some of the common causes of this error code:
- Paper jams: If the paper gets stuck in the printer’s paper tray, it can cause the lift motor to malfunction and result in the error code 60.03.
- Damaged lift motor: If the lift motor is damaged or worn out, it may not be able to lift the paper tray properly, leading to the error code.
- Faulty DC controller board: The DC controller board controls the lift motor, and if it malfunctions, it can cause the lift motor to stop working and trigger the error code.
- Loose or disconnected cables: If the cables connecting the lift motor and the DC controller board are loose or disconnected, the lift motor may not function correctly, causing the error code to appear.
- Overloaded paper tray: If the paper tray is overloaded with too much paper, it can put pressure on the lift motor, leading to the error code.
- Faulty sensor: A faulty sensor in the printer may also cause the error code to appear as it may not be able to detect the proper position of the lift motor.
By identifying the cause of the error code, you can take appropriate steps to fix it and get your printer up and running again.
How to Fix HP Printer Error Code 60.03?
To troubleshoot and fix HP Printer Error Code 60.03, follow these steps:
- Check for paper jams: Turn off the printer and check the paper tray for any paper jams. Remove any stuck paper or debris from the tray.
- Check the lift motor: Inspect the lift motor for any damage or wear and tear. If the motor is damaged, you may need to replace it.
- Check the DC controller board: Check the DC controller board for any damage or lose connections. If necessary, replace the board.
- Check the lift motor cable: Ensure that the cable connecting the lift motor and the DC controller board is securely connected. If it’s loose or damaged, replace the cable.
- Reduce the paper load: If the paper tray is overloaded with paper, remove some of the paper to reduce the load on the lift motor.
- Restart the printer: Turn off the printer, unplug it from the power source, and wait for 60 seconds. Then plug the printer back in and turn it on.
- Print a test page: Once you’ve completed the above steps, print a test page to ensure the error code is resolved.
If the above steps do not resolve the issue, you may need to contact a professional printer technician for further assistance. They can help diagnose the issue and provide the necessary repairs.
Conlusion
In conclusion, HP Printer Error Code 60.03 is an error message that indicates a problem with the Tray 2 lift motor of the printer. It can be caused by various issues such as paper jams, a damaged lift motor, a faulty DC controller board, loose or disconnected cables, an overloaded paper tray, or a faulty sensor.
To troubleshoot and fix the error code, you can try checking for paper jams, inspecting the lift motor, checking the DC controller board, ensuring the cable is connected securely, reducing the paper load, restarting the printer, and printing a test page. If the issue persists, it’s recommended to seek help from a professional printer technician. Regular maintenance and cleaning can help prevent this error code from occurring in the future.